Toggle Texture Individually Post Scan


  • A feature that could be very useful is the ability to toggle texture on/off with both Turntable Groups and individual scans after they've already been completed, much in the same way you can completely disable a scan's visibility.

    Example Scenario: Scanning a model where scanning spray was used but forgetting to change the pre-scan toggle, then resulting in scans that now have a white texture. Scans either need to be kept because they are needed for their geometry and will there for dilute when the mesh is completed and texturized, or the scans need to be completely redone. Instead, next to the eye-shaped visibility button, perhaps there could be another button, perhaps shaped like a painter’s palette, that could toggle off the texture for those specific scan groups while leaving their geometry visible.

    This could also be helpful when there are other odd discrepancies that show up, such as dust or a small bug landed on the object during a scan, a lighting change issue, etc.



  • @3D_Penguin thanks for the ideas and bug. I agree that can be frustrating. I'll have a think on how we would implement this from a UX side. 


  • Thanks @Drew Shark !

    *Woops... I tried to edit a typo in my previous comment and for some reason that seems to have deleted it. For anyone wondering, it was in regards to a texture/scan cropping issue.


  • +1

    Agree. It would be useful to select individual use/no_use of texture but keeping the mesh.

    Idea could be to have two eye's. One for mesh, another for texture. So user can decide individually for mesh and texture what should be used for merge processing.

    @3D_Penguin There should be one workaround for this. You could export those scans for which you want to remove the texture to PLY. Afterwards import PLY again and align to other mesh with texture.


Please login to reply to this topic!