I'm attaching some single scans so you can get a picture of what it looks like. The room lighting was off during scanning and the blinds were partially closed, so the lighting at the scanning locat...
@Vik Starre Hi Vik, Welcome to the community and congrats on your THREE scanner =) While I don't have specific experience scanning jewelry. I've found a helpful technique when working with symme...
@Brian Hyland Hi Brian, The scanner itself doesn't have built-in functions to align scans to the Cartesian coordinate system, so you'll need to do this manually in your post-processing software...
@DCLARS Hey Derik, Your experience sounds very familiar. You've actually discovered one of the fundamental challenges in reverse engineering. Let me explain what's happening and suggest some be...
@ROLAND BOILLE Yeah, I totally understand you. I've jokingly started calling the scanner a "waiting simulator". Luckily, I'm relatively patient, but sometimes it really annoys me, especially when i...
Hi Trevor,I finally got around to finding the time to try everything out again. I sent you the scans, including the original ones. Yes, one of the test scans contained a lot of scans because I was ...
@Trevor Townsend thank you for the update, the I2C error disappeared and hasn't reappeared since the update. Anyway, I'll send you the log files. The last log files before I updated the scanner to ...
1. Scanned from various angles and distances ranging from 160-250mm from the subject. On medium and high density with different noise reduction (0, 15, 31) and the edges of the subject in the resul...
I'm getting pretty desperate. I had a little higher expectations for this scanner. Do you have any ideas on how to improve the accuracy of the scan. I have already tried different angles and d...
@Tom Meeks a projector inside the scanner could also be used for center point. I have a film projector and it can project a calibration pattern to center it against the screen.
It would be enough for me if the keyboard shortcuts worked at all =D the only one that works for me is square select and undo. Ideally if it could all be binded to any buttons, maybe even the mouse...
